How to Create a Madhubani Painting Tree Planter?

Festive season is around the corner and everyone of us are look for ideas to decorate our homes. So, what could be better choice than using simple ideas to create functional decorative pieces.

Here I’m sharing an easy process using which you can create a folk art inspired planter all by yourself. Its  eco-friendly and cost effective too. You can use any waste jar to create this beautiful tree-planter.

DIY tree planter

In this pot, I have incorporated popular motifs of Madhubani art. Madhubani painting is a popular Indian folk art and anyone can learn it. You can read my post on How to do Madhubani painting in six easy steps to learn more about techniques of this art.

Materials required to transform a plastic jar to plant pot

  • Plastic jar
  • Ceramic powder
  • Fevicol (adhesive)
  • Old piece of cotton cloth of container size
  • Painting brushes: 1 flat and one fine tip round brush
  • Acrylic colors: white, brown
  • Clear varnish
  • Water

Process

First I will explain how I have created the base for this pot from an old plastic container.

  • Clean and dry the container before proceeding with further work. Measure and cut cloth as per the size of the container.

DIY tree planter - materials

  • In a bowl take ceramic powder and Fevicol in 3:1 ratio and mix it. Add small amount of water to make a thick paste.
  • Dip the cloth in this paste and evenly spread it on container. Make sure that cloth is spread smoothly all around or else you will find it difficult to paint.

diy-tree-planter-step3

  • Let it dry for few hours.

Coloring work

  • Now with the flat brush, apply base brown color all over. Again let it dry for 3-4 hours.

DIY tree planter - step4

  • Using fine tip round brush, we will now paint foreground motifs with white color. You can see more of madhubani motifs here and paint free hand as per your liking. You can even paint mandalas here if you enjoy creating mandalas. You may like to read post on how to draw mandala in six easy steps.
  • Apply 3-4 coats of clear varnish once the paint dries.

DIY tree planter

Note – Before planting any plant of your choice, do create a hole (approx 1 cm diameter) at the bottom of planter to allow water drainage.

I truly enjoy creating such small personalized home decor and gifts. You can also check how I created this personalized door nameplate and key-holder.

Adding such homemade pieces makes house our home and creates homely feeling. I hope you enjoy creating this easy planter.

Ask me if you have any doubt while creating this pot or while practicing Madhubani art. I will be most happy to help. Thanks for reading and hope to see you here again.

Do visit and like Bhaili’s Facebook page to get regular updates. You can also find me on Pinterest. You may also subscribe to this blog by entering your email-id in EMAIL SUBSCRIPTION section (top of the right-hand column for desktop-readers and bottom of screen for mobile-readers).

Kids Craft Idea – Key-holder

Keeping kids busy is a necessity and what could be better than keeping them occupied in doing something creative. Naturally, all kids are creative and they love creating something. They also enjoy seeing their creation displayed.

Therefore, a key-holder is a wonderful craft idea for kids, because it can be a nice household utility as well. So, in this post I’ll explain the procedure to make a key-holder that even your can make.

Key holder

Things required

  • Hard-board (or thin ply-board of 2mm-3mm thickness) cut-out
  • Hooks for holding keys
  • White M-Seal used for art and craft
  • Acrylic color
  • Baby talc
  • Adhesive (Fevicol)
  • Bowl to make paste
  • Fork
  • Coloring brush
  • Varnish
  • Rolling pin
  • Knife/cutter
  • Water
  • Rough cloth

Process

  • You can use hard-board of any size. I had this rectangular piece with me, so went ahead with it. You can get different (shapes and designs) hard-board cutouts at any art and craft store.  I opted for ‘Om’ symbol because it blended well, and fixed it (with nails) to rectangular hardboard piece.

Key holder hardboard cutout

  • Screw-in the hooks at appropriate position (as shown in above image). My husband helped me in this task. You can get these screws at any hardware store and get it fixed there.
  • Now the fun part for kids begins. First you’ll need adhesive and baby talc.

Key holder adhesive and talc

  • Mix 2 tbsp talc and approx 1 tbsp adhesive (e.g. Fevicol) to make a thick paste. Add just few drop of water to dilute this paste. Spread this paste all over the hard-board. Let it dry slightly for around 10 minutes and then create textures with help of a fork. Ask your child to make any random pattern or texture. Leave it overnight drying.

Key holder base coating

  • You can get white M-seal (used for art and craft work) from any craft store. In India, it’s popularly known as Shilpkar (from Fevicryl). To use Shilpkar, mix the resin base and hardener in equal proportion to form even dough. Sprinkle little amount talcum powder on hands to avoid sticking.

Key holder white mseal

  • Switch-off the fan while working with M-Seal because it hardens very quickly. Additionally keep it covered under its wrapper to protect it from drying. Kids do take time to make shapes from it.
  • With the help of rolling-pin, roll out some dough. Use knife/cutter to cut out one square and triangle shape from it.

Key holder dough-work

  • Apply some glue and stick the shapes on board to make a hut. You can get your your kid to add further detailing using the same dough. To form border, dough is now shaped like long tail and pasted on edges of board with the help of glue.

Key holder dough-work

  • After completing the m-seal work, let it to dry for approximately 2 hours. IF you are intrested in m-seal craft have a look at personalized nameplate.
  • Next is coloring stage which kids are really excited about. First, color the background and then proceed to fill color in foreground. Add detailing (keeping in mind kids’ comfort) with a small brush. In this project, detailing was added in the hut.

Key holder coloring-work

  • Leave it to completely dry for 10-12 hours and then apply varnish. Varnish works as a shield from wear and tear. With a coating of varnish, you can also clean it regularly with moist cloth.

Key holder varnishing

So, the key holder is finally complete and can be used to hang keys. Your child will be glad to see his/her creation being used for such a wonderful purpose.

If you like recycling and gifting personalized gifts you will surly like to know how I painted these glass bottles and turned them into vases.

Do visit and like Bhaili’s Facebook page to get regular updates. You can also find me on Pinterest. You may also subscribe to this blog by entering your email-id in EMAIL SUBSCRIPTION section (top of the right-hand column for desktop-readers and bottom of screen for mobile-readers).