Kids Craft Idea – Key-holder

Keeping kids busy is a necessity and what could be better than keeping them occupied in doing something creative. Naturally, all kids are creative and they love creating something. They also enjoy seeing their creation displayed.

Therefore, a key-holder is a wonderful craft idea for kids, because it can be a nice household utility as well. So, in this post I’ll explain the procedure to make a key-holder that even your can make.

Key holder

Things required

  • Hard-board (or thin ply-board of 2mm-3mm thickness) cut-out
  • Hooks for holding keys
  • White M-Seal used for art and craft
  • Acrylic color
  • Baby talc
  • Adhesive (Fevicol)
  • Bowl to make paste
  • Fork
  • Coloring brush
  • Varnish
  • Rolling pin
  • Knife/cutter
  • Water
  • Rough cloth

Process

  • You can use hard-board of any size. I had this rectangular piece with me, so went ahead with it. You can get different (shapes and designs) hard-board cutouts at any art and craft store.  I opted for ‘Om’ symbol because it blended well, and fixed it (with nails) to rectangular hardboard piece.

Key holder hardboard cutout

  • Screw-in the hooks at appropriate position (as shown in above image). My husband helped me in this task. You can get these screws at any hardware store and get it fixed there.
  • Now the fun part for kids begins. First you’ll need adhesive and baby talc.

Key holder adhesive and talc

  • Mix 2 tbsp talc and approx 1 tbsp adhesive (e.g. Fevicol) to make a thick paste. Add just few drop of water to dilute this paste. Spread this paste all over the hard-board. Let it dry slightly for around 10 minutes and then create textures with help of a fork. Ask your child to make any random pattern or texture. Leave it overnight drying.

Key holder base coating

  • You can get white M-seal (used for art and craft work) from any craft store. In India, it’s popularly known as Shilpkar (from Fevicryl). To use Shilpkar, mix the resin base and hardener in equal proportion to form even dough. Sprinkle little amount talcum powder on hands to avoid sticking.

Key holder white mseal

  • Switch-off the fan while working with M-Seal because it hardens very quickly. Additionally keep it covered under its wrapper to protect it from drying. Kids do take time to make shapes from it.
  • With the help of rolling-pin, roll out some dough. Use knife/cutter to cut out one square and triangle shape from it.

Key holder dough-work

  • Apply some glue and stick the shapes on board to make a hut. You can get your your kid to add further detailing using the same dough. To form border, dough is now shaped like long tail and pasted on edges of board with the help of glue.

Key holder dough-work

  • After completing the m-seal work, let it to dry for approximately 2 hours. IF you are intrested in m-seal craft have a look at personalized nameplate.
  • Next is coloring stage which kids are really excited about. First, color the background and then proceed to fill color in foreground. Add detailing (keeping in mind kids’ comfort) with a small brush. In this project, detailing was added in the hut.

Key holder coloring-work

  • Leave it to completely dry for 10-12 hours and then apply varnish. Varnish works as a shield from wear and tear. With a coating of varnish, you can also clean it regularly with moist cloth.

Key holder varnishing

So, the key holder is finally complete and can be used to hang keys. Your child will be glad to see his/her creation being used for such a wonderful purpose.

If you like recycling and gifting personalized gifts you will surly like to know how I painted these glass bottles and turned them into vases.

Do visit and like Bhaili’s Facebook page to get regular updates. You can also find me on Pinterest. You may also subscribe to this blog by entering your email-id in EMAIL SUBSCRIPTION section (top of the right-hand column for desktop-readers and bottom of screen for mobile-readers).